+7 (495) 646 89 26 info@component17.com Скопирован г. Москва, Нагорный проезд 7 стр 1
Обратный звонок
RU
RU
Menu Close

Product id:

MK64FN1M0VLQ12

MK64FN1M0VLQ12

NXP
MK64FN1M0VLQ12
В корзину Cart White

Тэги

Kinetis K64F Sub-Family DataSheet120 MHz ARM® Cortex®-M4-based Microcontroller with FPUThe K64 product family members are optimized for cost-sensitiveapplications requiring low-power, USB/Ethernet connectivity, andup to 256 KB of embedded SRAM. These devices share thecomprehensive enablement and scalability of the Kinetis family.This product offers:• Run power consumption down to 250 μA/MHz. Staticpower consumption down to 5.8 μA with full state retentionand 5 μs wakeup. Lowest Static mode down to 339 nA• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDOVreg, with USB device crystal-less operation• 10/100 Mbit/s Ethernet MAC with MII and RMII interfacesPerformance• Up to 120 MHz ARM® Cortex®-M4 core with DSPinstructions and floating point unitMemories and memory interfaces• Up to 1 MB program flash memory and 256 KB RAM• Upto 128 KB FlexNVM and 4 KB FlexRAM on deviceswith FlexMemory• FlexBus external bus interfaceSystem peripherals• Multiple low-power modes, low-leakage wake-up unit• Memory protection unit with multi-master protection• 16-channel DMA controller• External watchdog monitor and software watchdogSecurity and integrity modules• Hardware CRC module• Hardware random-number generator• Hardware encryption supporting DES, 3DES, AES,MD5, SHA-1, and SHA-256 algorithms• 128-bit unique identification (ID) number per chipAnalog modules• Two 16-bit SAR ADCs• Two 12-bit DACs• Three analog comparators (CMP)• Voltage referenceCommunication interfaces• Ethernet controller with MII and RMII interface• USB full-/low-speed On-the-Go controller• Controller Area Network (CAN) module• Three SPI modules• Three I2C modules. Support for up to 1 Mbit/s• Six UART modules• Secure Digital Host Controller (SDHC)• I2S moduleTimers• Two 8-channel Flex-Timers (PWM/Motor control)• Two 2-channel FlexTimers (PWM/Quad decoder)• IEEE 1588 timers• 32-bit PITs and 16-bit low-power timers• Real-time clock• Programmable delay blockClocks• 3 to 32 MHz and 32 kHz crystal oscillator• PLL, FLL, and multiple internal oscillators• 48 MHz Internal Reference Clock (IRC48M)Operating Characteristics• Voltage range: 1.71 to 3.6 V• Flash write voltage range: 1.71 to 3.6 V• Temperature range (ambient): –40 to 105°CMK64FN1M0Vxx12MK64FX512Vxx12121 XFBGA8 x 8 x 0.5 mm Pitch0.65 mm144 LQFP20 x 20 x 1.6 mm Pitch0.5 mm144 MAPBGA13 x 13 x 1.46 mmPitch 1 mm100 QFP14 x 14 x 1.7 mm Pitch0.5 mmNXP SemiconductorsK64P144M120SF5Data Sheet: Technical DataRev. 7, 11/2016NXP reserves the right to change the production detail specifications as may berequired to permit improvements in the design of its products.